- MCS RentalsHome
- Rohde & Schwarz Signal Generators
- Rohde & Schwarz Signal Generators
- Rohde & Schwarz SMBV100A Signal Generator
- Rohde & Schwarz SMBV100A Signal Generator
Rohde & Schwarz SMBV100A Signal Generator Description
The Rohde & Schwarz SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.
Rohde & Schwarz SMBV100A Features
- Frequency options from
9 kHz to3.2 GHz /6 GHz - Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
- Optional ARB-only baseband generators as cost-saving alternatives
- Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
- Fully fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS
- Special package for cost efficient GNSS Production Tester
- RF bandwidth of up to 160 MHz with internal baseband generator
- I/Q modulator with
528 MHz RF bandwidth - Optimised for high production throughput
- Prepared for aerospace and defence applications
- Low cost of ownership due to simple service concept
SMBV100A Configurations
Product Name | Options | Configuration | |
Rohde & Schwarz SMBV100A | B1 - Reference oscillator B10 - Baseband + ARB (32MS, 120 MHz RF BW) B90 - Phase coherence B92 - Removable hard disc B106 - 9 kHz - 6 GHz K22 - Pulse modulator K23 - Pulse generator K42 - Dig. Std. 3GPP FDD K43 - Dig. Std. 3GPP Enh. BS/MS Test incl. HSDPA K45 - Dig. Std. 3GPP FDD HSUPA K55 - Dig. Std. E-UTRA K59 - Dig. Std. HSPA+ K61 - Multi carrier CW signals K62 - Addictive white gaussian noise K84 - LTE release 9 |
Config 1 | Request Quote |
Rohde & Schwarz SMBV100A | B10 - Baseband + ARB(32MS, 120 MHz RF BW) B1H - OCXO high performance B90 - Phase coherence B92 - Removable hard disc B106 - 9 kHz - 6 GHz K18 - Digital Baseband connectivity K61 - Multi carrier CW signals |
Config 2 | Request Quote |
Rohde & Schwarz SMBV100A Signal Generator Description
The Rohde & Schwarz SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.
Rohde & Schwarz SMBV100A Features
- Frequency options from
9 kHz to3.2 GHz /6 GHz - Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
- Optional ARB-only baseband generators as cost-saving alternatives
- Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
- Fully fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou and QZSS/SBAS
- Special package for cost efficient GNSS Production Tester
- RF bandwidth of up to 160 MHz with internal baseband generator
- I/Q modulator with
528 MHz RF bandwidth - Optimised for high production throughput
- Prepared for aerospace and defence applications
- Low cost of ownership due to simple service concept
SMBV100A Configurations
Product Name | Options | Configuration | |
Rohde & Schwarz SMBV100A | B1 - Reference oscillator B10 - Baseband + ARB (32MS, 120 MHz RF BW) B90 - Phase coherence B92 - Removable hard disc B106 - 9 kHz - 6 GHz K22 - Pulse modulator K23 - Pulse generator K42 - Dig. Std. 3GPP FDD K43 - Dig. Std. 3GPP Enh. BS/MS Test incl. HSDPA K45 - Dig. Std. 3GPP FDD HSUPA K55 - Dig. Std. E-UTRA K59 - Dig. Std. HSPA+ K61 - Multi carrier CW signals K62 - Addictive white gaussian noise K84 - LTE release 9 |
Config 1 | Request Quote |
Rohde & Schwarz SMBV100A | B10 - Baseband + ARB(32MS, 120 MHz RF BW) B1H - OCXO high performance B90 - Phase coherence B92 - Removable hard disc B106 - 9 kHz - 6 GHz K18 - Digital Baseband connectivity K61 - Multi carrier CW signals |
Config 2 | Request Quote |
Frequency | ||
Range | R&S SMBV-B103 | |
CW mode | 9 kHz to 3.2 GHz | |
I/Q mode | 1 MHz to 3.2 GHz | |
R&S SMBV-B106 | ||
CW mode | 9 kHz to 6 GHz | |
I/Q mode | 1 MHz to 6 GHz | |
Setting time | SCPI mode, ALC state on, CW mode | <3 ms |
SCPI mode, ALC state on, I/Q mode | <5 ms | |
SCPI mode, ALC state table | <4 ms | |
SCPI mode, ALC state S&H | <7 ms | |
List mode | <1 ms |
Level | ||
Maximum output power | 1 MHz < f = 6 GHz | >+18 dBm (PEP)1) |
Absolute level error | 200 kHz ≤ f ≤ 3 GHz | <0.5 dB |
Additional level error with ALC OFF, S&H | This mode is automatically selected with I/Q modulation and pulse modulation. | <0.25 dB |
Output impedance VSWR in 50 Ω system | 200 kHz < f ≤ 6 GHz | <1.8 |
Setting time | SCPI mode, ALC state on, CW mode | <2.5 ms |
SCPI mode, ALC state on, I/Q mode | <5 ms | |
SCPI mode, ALC state table | <4 ms | |
SCPI mode, ALC state S&H | <7 ms | |
List mode | <1 ms | |
Reverse power | 1 MHz < f ≤ 1 GHz | 50 W |
1 GHz < f ≤ 2 GHz | 25 W | |
2 GHz < f ≤ 6 GHz | 10 W |
Spectral purity | ||
Harmonics | f > 1 MHz; CW, level ≤ 8 dBm | <-30 dBc |
Nonharmonics | CW, level > –10 dBm, >10 kHz carrier offset, f ≤ 1500 MHz | <-70 dBc (<-84 dBc typ.) |
SSB phase noise | 20 kHz carrier offset, 1 Hz measurement bandwidth, CW | |
f = 100 MHz | <-141 dBc (–147 dBc typ.) |
|
f = 1 GHz | <-122 dBc (–127 dBc typ.) |
|
f = 6 GHz | <-106 dBc (–112 dBc typ.) |
|
Wideband noise | attenuator mode auto for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW | <-142 dBc |
Supported analog modulation modes | ||
Amplitude modulation | standard | |
Frequency/phase modulation | standard | |
Maximum FM deviation | f > 3 GHz | 16 MHz |
Maximum φM | f > 3 GHz | 160 rad |
Pulse modulation | optional, with R&S®SMBV-K22 |
|
On/off ratio | >80 dB | |
Rise/fall time | 10 % to 90 % of RF amplitude | <20 ns, 4 ns (typ.) |
Minimum pulse width | using the optional R&S®SMBV-K23 pulse generator |
10 ns |
I/Q modulation | ||
Internal digital standards (with additional options) |
R&S SMBV-B10 baseband generator required | GSM/EDGE/EDGE Evolution/VAMOS, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/LTE, WiMAX™, WiMAX IEEE802.11a/b/g/ac, TETRA Release 2, GPS, Glonass, Galileo, Bluetooth® EDR and LE, XM Radio™, SIRIUS Radio, HD Radio™2), , FM stereo/RDS, DAB/T-DMB, DVB-H/DVB-T, multicarrier CW |
Realtime custom digital modulation | R&S SMBV-B10 baseband generator required | ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, π/2-DBPSK, π/4-DQPSK, π/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM |
I/Q modulator bandwidth | internal | 60 MHz, 120 MHz or 160 MHz, depending on baseband options |
external | >500 MHz | |
Maximum waveform length | 32 Msample | |
with R&S SMBV-K511 option | 256 Msample | |
with R&S SMBV-K512 option | 1 Gsample | |
DAC resolution | 16 bit | |
ACLR | WCDMA 3GPP FDD, TM 1/64 | 67 dBc (typ.) |
EVM | WCDMA 3GPP FDD, TM 1/64 | 0.4 % (meas.) |
WLAN IEEE 802.11 ac, 160 MHz | 0.44 % (meas.) | |
EUTRA/LTE | 0.4 % (meas.) |
Connectivity | ||
Remote control | IEC/IEEE, Ethernet (LAN), USB, serial (RS‑232)3) | |
Peripherals | USB 2.0 (high speed) |
1) PEP = peak envelope power.
2) HD RadioTM is a proprietary trademark of iBiquity Digital Corp.
3) Requires R&S®TS-USB1 (recommended extra).
Brochures and Data Sheets R&S SMBV100A - Product Brochure
R&S SMBV100A Vector Signal Generator - Product Brochure
GNSS Simulator in the R&S®SMBV100A Vector Signal Generator - Specifications
Digital Standards for Signal Generators - Specifications
Fact Sheets SBAS Signal Generation - Fact Sheet
GNSS Signal Generation GLONASS - Fact Sheet
Rohde & Schwarz GNSS Solutions - Fact Sheet
RELATED PRODUCTS
Up to 6 GHz Model Available
The R&S SMU200A Vector Signal Generator not only combines up to two independent signal generators in one cabinet of only four height units, it also offers unrivalled RF and baseband characteristics.
Up to 6 GHz Model Available
The R&S SMU200A Vector Signal Generator not only combines up to two independent signal generators in one cabinet of only four height units, it also offers unrivalled RF and baseband characteristics.
Up to 40 GHz Model Available
The R&S SMW200A is the vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality.
Up to 40 GHz Model Available
The R&S SMW200A is the vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality.